Home Single Wifi Camera Installation

We all have wifi connections in our Auckland homes, one wifi single camera is easy to be installed anywhere with a good wifi connection. Basically you can tell how well is your wifi coverage from your smart phone wifi connection. After deciding that you can set up this wifi security camera easily without issues, unless, one major headache is the power supply. The wifi camera requires a DC adapter to boost it, and the DC adapter has to be connected to a power socket.

Key Features:
 1.Up to 1.0 megapixel (1280 ×720P @ 30 fps) resolution
 2.Standard video compression with high compression ratio
 3.Progressive scan CMOS
 4.Built-in Micro SD/SDHC/SDXC card slot, up to 64 GB
 5.IR range approx. 10 meters
 6.Two-way audio
 7.Built-in microphone and speaker
 8.Support PIR(Passive Infrared Detection)
 9.IR cut filter with auto switch
 10.3D digital Noise Reduction
 11.Support dual stream, and the sub-stream for mobile surveillance
 14.Integrated mount for easy installation
 15.Support Backlight Compensation, Digital Wide Dynamic Range, Auto-electronic shutter and so on
 16.Other functions: heartbeat, mirror, reset button, etc.

Application Scenarios:
It is suitable for indoor monitor space with HD image quality like small market, home, office. In addition, it can be
used in small range monitor space like unattended storage, hall, accounting office, motor room, garage and so on.

Max. Image Resolution: 1600×1200
Frame Rate: 50 Hz: 25 fps (1280 × 720)
60 Hz: 30 fps (1280 × 720)
Image Settings: Saturation, brightness, contrast adjustable through client software or web browser
Network: Network Storage: NAS (iSCSI optional)
Alarm Trigger: Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception
Protocols: TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP,802.1x, Qos (SIP, SRTP, IPv6 optional)
Security: User authentication, watermark
System Compatibility: ONVIF, PSIA, CGI WI-FI
Support Interface:
Audio: Internal Microphone and Speaker
Communication Interface:
1 RJ45 10M / 100M ethernet interface
On-board storage: Built-in Micro SD slot, up to 32 GB
Reset Button: Yes
General: Operating Conditions: -10 °C ~ 60 °C (14 °F ~ 140 °F)
Humidity 90% or less (non-condensing)
Power Supply: 5 V DC ± 10%
Power Consumption: 4W MAX
Dimensions: 70.4 × 110 × 47.6mm   (2.77″ × 4.33″ × 1.87″)